Overview

The Semtech AF-3068 represent ultra-low power and high SNR single-channel Analog Front-End devices (AFEs). They are designed to work with a broad range of industry sensors, including all Semtech force sensors, to enable the best sensing solutions. The AFEs allow direct connection of these sensing solutions to a host processor via an industry standard I²C interface. Up to four AFEs can be connected to a host using a single I²C interface.The AF-3068 are designed for Always-On applications. They sample the sensing signals and off-load the host, allowing the host to remain asleep during tasks such as auto-calibration. In force applications, these AFEs can wake the system via an interrupt when a pre-defined force trigger level is achieved. In active mode, sampling at 100 Hz, the entire solution consumes only 5 μA. Depending on the sampling frequency, the solution has a low latency of 1 ms.The AF-3x68 is available in a 9-pin CSP package (1.16 mm x 1.16 mm x 0.475 mm) and can be used with all Semtech sensors or any other analog sensor.

Features

  • Analog front end for MEMS Force sensors
  • Integrated instrumentation amplifier with programmable gain (up to x416)
  • Sensor duty-cycle control
  • Ultra-low power: 5 μA @ 100 Hz (sensor + AFE)
  • Runtime auto-calibration
  • Auto-preload adjust on power-up
  • Low latency: 1 ms
  • Single channel differential input
  • I2C slave interface
  • Hardware and/or software programmable force trigger
  • 9-Pin CSP, 1.16 mm x 1.16 mm x 0.475 mm

Applications

  • Smart Phones and Tablets
  • Automotive
  • Industrial
  • IoT, Weight Scales, White Goods
  • Wearables
  • Gaming
  • Stylus, Touchpads, Smart Home, AR/VR

Inventory

Product Country Distributor Qty Buy