LED Drivers
  • SC653
  • Light Management Unit with 2 LDOs and SemPulse™ Interface
  • SC654
  • Light Management Unit for 6 LEDs with SemPulse™ Interface
  • SC657
  • Backlight LED Driver for 5 LEDs with SemPulse™ Interface
  • SC658
  • Backlight LED Driver for 4 LEDs with SemPulse™ Interface
  • SC652
  • Backlight LED Driver for 5 LEDs with Charge Pump and PWM Control
  • SC656
  • Backlight LED Driver for 7 LEDs with Charge Pump and PWM Control
  • EZ1587I
  • 3 Amp Positive Voltage Regulator
  • LCDA24
  • 24 V Low-Capacitance TVS Diode Array For High-Speed Data Interfaces
  • LCDA15C-8
  • 15 V Low-Capacitance, 8-Line TVS Array
  • SC561
  • Dual Output Low Noise LDO Linear Regulator
  • SC810
  • Single Input/Single Mode Single-cell Li-ion Battery Charger
  • SCDAS4F
  • Standard Recovery, High Current Center Tap and Doubler Rectifier Assemblies
Semtech SC652

Semtech SC652

Backlight LED Driver for 5 LEDs with Charge Pump and PWM Control

The SC652 is a high effi ciency charge pump LED driver using Semtech’s proprietary charge pump technology. Performance is optimized for use in single-cell Li-ion battery applications.

Features

  • Input supply voltage range — 2.9V to 5.5V
  • Charge pump modes — 1x, 1.5x and 2x
  • PWM dimming control with low pass fi lter provides
  • DC backlight current (not pulsed)
  • PWM frequency range — 200Hz to 50kHz
  • Five adjustable current sinks — 500μA to 25mA
  • Backlight current accuracy ±1.5% typical
  • Backlight current matching ±0.5% typical
  • LED float detection
  • Charge pump frequency — 250kHz
  • Low shutdown current — 0.1μA typical
  • Ultra-thin package — 2 x 2 x 0.6(mm)
  • Fully WEEE and RoHS compliant

Applications

  • Cellular phones, smart phones, and PDAs
  • LCD display modules
  • Portable media players
  • Digital cameras
  • Personal navigation devices
  • Display/keypad backlighting and LED indicators
     

Packaging

MLPQ-UT-14

Order Codes

  • SC652ULTRT: Backlight Driver for 5 LEDs with Charge Pump and PWM Control