Cable Drivers
  • GS12090
  • Bidirectional 12G UHD-SDI Re-timing Adaptive Cable Equalizer/Cable Driver
  • GS3490
  • Configurable Multi-rate 3G Cable Driver and Adaptive Equalizer
  • GS6080
  • Multi Rate 6G UHD-SDI Cable Driver
  • GS6081
  • Multi Rate 6G UHD-SDI Dual Output Cable Driver
  • GS2988
  • Multi-rate 3G SDI Cable Driver
  • GS2989
  • Multi-rate 3G SDI Dual Output Cable Driver
  • GS1678
  • Multi-rate HD-SDI Cable Driver
  • GS1679
  • Multi-rate Dual Slew-rate Cable Driver for HD-SDI, SD-SDI & DVB-ASI
Semtech GS12181

Semtech GS12181

12G UHD-SDI Retiming Cable Driver

Add to Watch List

The GS12181 is a low-power, multi-rate, serial digital retiming cable driver supporting 12G UHD-SDI. It is designed to receive 100ohm differential input signals, automatically recover the embedded clock from the digital video signal and re-time the incoming data, and transmit the re-timed signal over 75ohm coaxial cables.
Watch an overview video of the 12G UHD-SDI Solutions

Features


  • Multi-standard operation from 1Mb/s to 11.88Gb/s
  • SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant output
  • Support for DVB-ASI at 270Mb/s and MADI at 125Mb/s
  • Low power operation: approx. 310mW
  • Automatic power down on loss of signal
  • Differential input support DC-coupling from 1.2V to 2.5V CML logic
  • On-chip 100ohm differential input data termination
  • Programmable trace equalization to compensate for up to 20” FR4 at 11.88Gb/s
  • 1.8V power supply operation
  • Manual bypass for low data rates with slow rise/fall times
  • 75ohm cable driver outputs
    • Individually selectable output pre-emphasis to pre-compensate for FR4 losses after chip output at 11.88Gb/s
    • High levels of pre-emphasis available (up to 8” of FR4) using higher output driver voltage supply
  • Automatic/manual output slew rate control
  • GSPI serial control and monitoring interface
  • Cable equalizer bypass
    • Manual Bypass function for low data rates
    • Configurable automatic bypass for low data rates
  • Four configurable GPIO pins for control or status monitoring
  • Wide operating temperature range: -40ºC to +85ºC
  • Small 6mm x 4mm 40-pin QFN
  • Pb-free and RoHS-compliant package

Applications


  • Next Generation 3D / 2D HFR HDTV and 2K D-Cinema, UHDTV1 and 4K D-Cinema end-equipment: Cameras, Monitors, Switchers etc.
  • Next Generation 3G, 6G, and 12G UHD-SDI infrastructures designed support of UHDTV2, UHDTV1, 4K D-Cinema and 3D HFR and HDR production image formats.

Packaging

Order Codes

 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.