• GS6152
  • Multi-Rate 6G UHD-SDI Reclocker
  • GS2986
  • Multi-rate 3G SDI Reclocker
  • GS2985
  • Multi-rate 3G SDI Reclocker
  • GS2965
  • Multi-rate 3G SDI Reclocker
  • GS1675
  • Multi-Rate SDI Automatic Reclocker with Dual Differential Outputs
  • GS9076
  • SD-SDI Automatic Reclocker with Dual Differential Outputs
Semtech GS6151

Semtech GS6151

Multi-Rate 6G UHD–SDI Reclocker

Add to Watch List

The GS6151 is a low-power, multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and re-time the incoming video data.
The GS6151 will recover the embedded clock signal and retime the data from 6G UHD-SDI signals compliant with the proposed SMPTE ST 2081. In addition, it can also re-time SMPTE ST 259-C, SMPTE ST 292, SMPTE ST 424 or DVB-ASI compliant digital video signals as well as MADI audio streams.
Watch an overview video of the GS6150 Family


  • SMPTE ST 2081, ST 424, ST 292, and ST 259-C compliant
  • Supports retiming data at rates of 125Mb/s, 270Mb/s, 1.485 and 1.485/1.001Gb/s, 2.97 and 2.97/1.001Gb/s,5.94 and 5.94/1.001Gb/s
  • Supports retiming of DVB-ASI signals
  • Automatic or Manual Rate Selection
    • Detected rate indication in Auto Mode
  • 2:1 input selector
  • Option of two reclocked data outputs or one data output and one recovered clock output
  • Two configurable GPIO pins with ability to output
  • device status, including:
    • Lock Detect
    • Loss of Signal (LOS) outputs
    • Low/High bit-rate indication for slew-rate control of SDI cable drivers
  • On-chip 100 Ohms differential input and output termination
  • Bypass support for rates up to 5940Mb/s
    • Manual Bypass function
    • Configurable automatic Bypass when not locked
  • Option to use external reference or operate referenceless
  • Cascading reference buffer supports multiple reclockers using a single reference source
  • Input signal equalization and output signal de-emphasis to compensate for trace dielectric losses
  • Single power supply operation at 1.8V
  • 130mW typical power consumption (150mW with second output enabled)
  • Pb-free and RoHS compliant
  • Operating temperature range: -40°C to 85°C


  • SMPTE ST 2081, SMPTE ST 424,
  • SMPTE ST 292, SMPTE ST 259-C coaxial cable serial digital interfaces
  • EN50083-9 DVB-ASI interfaces
  • MADI standard
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.