SC415: Dual Synchronous Buck Controller

The SC415 is a versatile, constant on-time, pseudo fixed frequency, dual synchronous buck PWM controller intended for notebook computers and other battery operated portable devices. The SC415 contains all the features needed to provide cost-effective control of two independent switchmode power supplies.


Collapse All

Features

  • VIN Range 3-25V
  • Outputs Adjustable from 0.75 to 5.25V, or Preset Output Voltages:
    • VOUT1 = 1.8 or 1.5V
    • VOUT2 = 1.25 or 1.05V
  • Low Shutdown Power
  • Constant On-Time for Fast Dynamic Response
  • Adjustable Switching Frequency
  • Separated Frequencies for Minimal Switching Interaction:
    • VOUT1 = up to 600kHz
    • VOUT2 = up to 720kHz
  • Power Save or Continuous Operation at Light Load
  • Adjustable Soft-start Rates for Each Output
  • Soft-Shutdown for Each Output
  • Over-Voltage and Under-Voltage Fault Protection
  • Cycle-by-Cycle Valley Current Limit
  • DC Current Sense Using Low-Side RDSON Sensing, or RSENSE in Source of Low-Side MOSFET for Greater Accuracy
  • Separate Power Good Outputs
  • Separate Enable/Power Save Inputs
  • 3.1A Non-Overlapping Gate Drive
  • SmartDriveTM for High-Side MOSFET
  • MLP 4x4 24 Pin Package
  • Industrial Temperature Range

Diagrams

Typical Applicate Circuit

SC415 - Typical Applicate Circuit

Click diagram to enlarge

Applications

  • Notebook and Sub-Notebook Graphics
  • Voltage Controllers
  • Tablet PCs
  • Embedded Applications

Packaging

MLPQ-24

Order Codes

  • SC415MLTRT: Lead-free, RoHS and WEEE compliant, 3000 pcs. Tape & Reel
Order Sample Button
Pb-Free/RoHS/WEEE Status

Related Documents

Datasheets
Calculator