Cable Drivers
  • GS6080
  • Multi Rate 6G UHD-SDI Cable Driver
  • GS6081
  • Multi Rate 6G UHD-SDI Dual Output Cable Driver
  • GS3490
  • Configurable Multi-rate 3G Cable Driver and Adaptive Equalizer
  • GS12181
  • 12G UHD-SDI Retiming Cable Driver
  • GS2988
  • Multi-rate 3G SDI Cable Driver
  • GS2978
  • Multi-rate 3G SDI Cable Driver
  • GS1678
  • Multi-rate HD-SDI Cable Driver
  • GS1679
  • Multi-rate Dual Slew-rate Cable Driver for HD-SDI, SD-SDI & DVB-ASI
Semtech GS2989

Semtech GS2989

Multi-rate 3G SDI Dual Output Cable Driver

Add to Watch List

The GS2989 is Gennum's newest, SMPTE compatible quad output cable driver which supports datarates from 270Mb/s to 2.97Gb/s. The GS2989 is a high-speed BiCMOS integrated circuit designed to drive one to four 75? coaxial cables.

The GS2989 may drive data rates up to 2.97Gb/s and provides two selectable slew rates in order to achieve compliance to SMPTE 424M, SMPTE 292M and SMPTE 259M.  The GS2989 accepts industry-standard differential input levels including LVPECL and CML.

Input trace equalization compensates for up to 10 inches of FR4 trace loss. This feature can be disabled using the EQ_EN pin.  The DISABLE1 and DISABLE2 pins power-down the first and second output drivers respectively, leaving the serial data outputs in a high-impedance state. When applied simultaneously, the entire device is powered-down.

The GS2989 features adjustable output swing using an external bias resistor. The single-ended output swing is adjustable from 500mVpp to 1800mVpp.  An output signal presence function, the OSP pin, indicates whether an active signal is present at the output of the GS2989.

The GS2989 can be powered from either a 3.3V or a 2.5V supply. Power consumption is typically 125mW using a 2.5V power supply with one output enabled.

The GS2989 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant.  This component and all homogeneous subcomponents are RoHS compliant.

Features


  • SMPTE 424M, SMPTE 292M and SMPTE 259M compliant
  • Quad output
  • Input signal trace equalization
  • Supports DVB-ASI at 270Mb/s
  • Supports data rates from 270Mb/s to 2.97Gb/s
  • Wide common-mode range input buffer
    • 100mV sensitivity
    • Supports DC coupling to industry-standard differential logic
    • On-chip 100? differential data input termination
  • Dual differential coaxial-cable-driving outputs
    • Selectable slew rates
    • Adjustable output swing from 500mVpp to 1800mVpp
    • Independent DISABLE controls for each output
  • Robust output signal presence function
  • Excellent output eye quality
  • Power supply operation at 3.3V or 2.5V
  • 125mW power consumption (2.5V supply)
  • Operating temperature range: -40°C to +85°C
  • Small footprint QFN package (4mm x 4mm)
    • New dual-output pin out
    • Use the GS2988 for a single-output variant that is drop-in compatible to the GS2978
  • Pb-free and RoHS compliant

Applications


  • Audio De-embedders
  • Audio Embedders
  • Camera
  • Camera Control Units
  • Distribution Amplifiers
  • Encoders/Decoders
  • Format Detectors
  • Master Control Switchers
  • Monitors
  • Multiviewers
  • Production Switchers
  • Routers
  • SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial cable serial digital interfaces
  • Test and Measurement Equipment
  • Up/Down/Cross Converters
  • Video Capture Cards
  • Video Servers
  • Video Tape Recorders

Order Codes

  • GS2989-INTE3Z: Lead-Free, RoHS Compliant, Tape and Reel-2500 Pieces
  • GS2989-INTE3: Lead-Free, RoHS Compliant, Tape and Reel-250 Pieces
  • GS2989-INE3: Lead-Free, RoHS Compliant, Tray-490 Pieces
 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.