Cable Drivers
  • GS12081
  • 12G UHD-SDI Cable Driver
  • GS3281
  • 3G HD-SDI Re-timing Cable Driver
  • GS12181
  • 12G UHD-SDI Retiming Cable Driver
  • GS6080
  • Multi Rate 6G UHD-SDI Cable Driver
  • GS6081
  • Multi Rate 6G UHD-SDI Dual Output Cable Driver
  • GS2988
  • Multi-rate 3G SDI Cable Driver
  • GS2989
  • Multi-rate 3G SDI Dual Output Cable Driver
  • GS1678
  • Multi-rate HD-SDI Cable Driver
Semtech GS12281

Semtech GS12281

12G UHD-SDI Re-timing Cable Driver

Add to Watch List

The GS12281 is a low-power, multi-rate, re-timing cable driver supporting rates up to 12G UHD-SDI. It is designed to receive 100Ohm differential input signals, automatically recover the embedded clock from the digital video signal and re-time the incoming data, and transmit the re-timed signal over 75Ohm coaxial cables. The 100Ohm trace input supports up to 17dB of insertion loss.The device supports SMPTE ST 2082-1 (12G UHD-SDI), ST 2081-1 (6G UHD-SDI), ST 424 (3G SDI), ST 292-1 (HD-SDI) and ST 259 (SD-SDI). In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s, MADI at 125Mb/s, and 10GbE. The two cable drivers have highly configurable pre-emphasis and swing controls to compensate for long trace and connector losses. Additionally, automatic and user selectable output slew rate control is provided for each cable driver output.

Features


  • Dual non-inverted 75Ω cable interface with on-chip termination
  • SMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1 and ST 259 compliant input/output
  • Multi-standard operation from 1Mb/s to 11.88Gb/s
  • In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s, and MADI at 125Mb/s.
  • 3D Input Signal Eye Monitor
  • PRBS generator and checker
  • Cable driver mode features:
    • Wide swing control
    • Pre-emphasis to compensate for significant insertion loss between device output and BNC
    • Automatic/manual output slew rate control
    • Manual or automatic re-timer bypass
    • Manual or automatic Mute or disable on LOS
  • Trace equalizer features:
    • Integrated 100Ω, differential input termination
    • Automatic power down on loss of signal
    • Adjustable carrier detect threshold
    • DC-coupling from 1.2V to 2.5V CML logic
    • Trace equalization to compensate for up to 20” FR4 at 11.88Gb/s
    • Automatic input offset compensation
  • CDR features:
    • Manual or automatic rate modes
    • Wide Loop bandwidth control
    • Re-timing at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, 2.97Gb/s, 5.94Gb/s, and 11.88Gb/s. This includes the f/1.001 rates.
  • Single 1.8V power supply for analog and digital core
  • 2.5V or 3.3V for cable driver output supply
  • GSPI serial control and monitoring interface
  • Four configurable GPIO pins for control or status monitoring
  • Wide operating temperature range: -40ºC to +85ºC
  • Small 6mm x 4mm 40-pin QFN
  • Pin compatible with the GS12181, GS12182, GS12081, and GS3281
  • Pb-free/Halogen-free/RoHS and WEEE compliant package

Applications


Next Generation 3D / 2D HFR HDTV and 2K D-Cinema, UHDTV1 and 4K D-Cinema end-equipment: Cameras, Monitors, Switchers, etc.

Next Generation 3G, 6G, and 12G UHD-SDI infrastructures designed in support of UHDTV1, UHDTV2, 4K D-Cinema and 3D HFR and HDR production image formats.

 
- Close -
Add Product to Watch List

Please login to the mySemtech member site to add products to your personal Watch List.

If you're not registered for mySemtech, please Register now. mySemtech member benefits include pre-filled forms for quick and easy online ordering, technical support, new product information and more.