Transimpedance Amplifiers
  • GN1032
    • 2.5Gb/s Transimpedance Amplifier with Automatic Gain Control
  • GN1035
    • GN1035 2.5Gb/s Transimpedance Amplifier with Automatic Gain Control
  • GN1052
    • 10/11.3 Gb/s Limiting Transimpedance Amplifier
  • GN1055
    • 10/11.3 Gb/s Limiting Transimpedance Amplifier with Slicing Adjust
  • GN1056
    • 10/11.3 Gb/s Linear Transimpedance Amplifier
  • GN1057
    • 10/11.3 Gb/s Transimpedance Amplifier with Automatic Gain Control
  • GN1068
    • 4-16 Gb/s Rate-Selectable Transimpedance Amplifier
  • GN7068
    • 10 Gb/s TIA for PON Applications
Semtech GN1058

Semtech GN1058

10/11.3 Gb/s Transimpedance Amplifier with Automatic Gain Control for SFP+ Applications

Gennum's GN1058 is a fully integrated silicon germanium (SiGe) BiCMOS transimpedance amplifier, providing wideband low noise pre-amplification of a current signal from a PIN photodiode or APD.

The GN1058 is intended for use in SFP+ applications.  It features differential outputs and incorporates automatic gain control (AGC) to improve linear dynamic range. A decoupling capacitor on the supply is the only external component required.

Features


  • Single +3.3V power supply
  • Power dissipation 190mW (typical)
  • Bandwidth remains constant over dynamic range
  • Typical small signal gain of 4 kΩ
  • RSSI (Receive Signal Strength Indicator)
  • Operates from 9.95Gb/s to 11.3 Gb/s NRZ

Applications


  • ITU/IEEE-based transmission systems, test equipment and modules, especially intended for 10GBASE-LRM SFP+ applications
  • OC-192 fibre optic modules and line termination
  • 10 Gigabit Ethernet
  • Fibre Channel
  • Serial data systems up to 11.3 Gb/s

Order Codes

n/a